Spy 5000m Installation Manual Pdf 'LINK'
Download --->>> https://urluss.com/2t7YZL
This Alarm is rather typical of after-market motorcycle/ scooter alarms available all over the world. My installation was not standard, and was more complicated than I expected, so I am sharing my experiences and knowledge to possibly assist anyone else who finds themselves in a similar situation. I have found previous guides lacking some of the finer detail which may be required, so I have included as much information as possible to hopefully aid the reader.
SPY 5000m motorcycle kitCB250 NighthawkElectrical Schematic for both kit and bikesoldering iron & solderheatshrinkelectrical tapecutters , screwdriver socket set, scissorsAutomotive Relay SPST and CradleAutomotive Relay SPDT3 x 1N4004 Diodes1 x BD681 Darlington Transistor1 x 68kOhm ResistorSpade Terminals and Spade LugsMultimeter for continuity/voltage
I have noticed other installation guides and a lot of people only have partial success with their installations. Disabled ignitions, disabled kill switches, features un-useable because things are not understood, blown fuses, flattened batteries, burnt wires, damaged components. I think someone would have to be very lucky to find a generic alarm which matches their motorcycle perfectly. Or pay a fortune to an installer to avoid the hassles and headaches which can be created by D.I.Y.
Do you think that it would be totally necessary to use the kill switch function? i see it as more of a danger because if your riding and somehow the lock button is pressed on the remote, wouldn't it kill the engine while your riding? And also, if the bike is parked somewhere, it cannot be started without the key anyway, so i dont think it is worthwhile installing the remote kill switch function (Modification#1)? Also since my bike doesn't have electric start, would you agree that this can be installed without using or wiring up the remote start function? And thankyou for posting this, would be the best writeup on the net on installing these SPY5000m units!!!
Do not drive the motorcycle when the remote starting feature is on. Do not install the remote start feature on a manual transmission as any damages resulting from this action will be the sole responsibility of the motorcycles owner. The manufacturer and the reseller assume no liability for any damages incurred by the motorcycles owner if driving with the remote feature on or if the remote feature is installed on a manual transmission.
Burglar-proof universal alarm SPY 5000m 2 ways for motorcycles and quads. Flushed and subdued remote, I warn to the control with a scope of up to 5 km. It remains communicated by your motorcycle at all time.
I warn to the control in case of blows, attempt of take-off of the motorcycle. Sensor of blows with 5 sensibilities. Alarm with siren of 120 dBs. Burglar-proof - immobilizer. It allows to cut the ignition of the motorcycle. 2 controls with backlit screen and configurable. Remote total control. It allows to know if we have the Motorcycle in area of coverage of the control. Resistant to the water (splashes, not submersible). Easy installation and use. Scheme of assembly. Instructions in Spanish and english. Warranty 2 years 2b1af7f3a8